CARACTERÍSTICAS GENERALES:

VALVULA DE ALIVIO DE AIRE BOLA SIMPLE FUNCION TRIPLE PN10 / 16/25
501A / PN10-16-ANSI150 #

Material de construcción en fundición dúctil GJS450
Interior y flotador en ABS
Presión de trabajo 1.0Mpa 1.6Mpa 2.5Mpa
Pintura epoxi FBE Min 250 Mic

Ref. 99/503A AIR RELEASE VALVE WITH CUT VALVE TRIPLE FUNCTION FLANGED END

SKU: 503A-99

Las condiciones de trabajo:
Clasificaciones de presión: 1.0Mpa; 1.6Mpa; 2.5Mpa
Temperatura de trabajo: -10C + 100C
Medios adecuados: Conexión final de agua: PN 10 / PN 16 / PN 25
Consulte con la fábrica para otras aplicaciones.
(a) Any descriptive information or samples supplied by DAVINCI VALVES LTD, or on its behalf, are for general guidance only and do not form part of any contract between DAVINCI VALVES LTD and the customer and the customer admits that it was not induced to enter into the contract by any representation contained in such information or sample. (b) DAVINCI VALVES LTD may at the request of the customer without being under any obligation to do so, furnish technical advice concerning the use of the products and such assistance will be given to the best of DAVINCI VALVE’s ability but this shall be on the express understanding that any such advice or assistance is given and accepted at the customer’s risk and DAVINCI VALVES shall not be liable for any loss, damage or claims arising there-from. (c) No liability will be accepted for work carried out or material supplied to the customer’s own drawings, design or specifications. (d) The submission of a quotation or acceptance of any order by DAVINCI VALVES in no way implies any responsibility on its part for any by-law, planning or other approval which may be required by the customer.

Información del producto